For Quantity Discount, Please Call
1 909 594 8088![]() |
Home | Power Supplies| 80 Plus Power Supply| Sure Star 80+ Power Supply| Sure Star 2U 600W 80 Plus High Efficiency Power Supply, Model # SS-2U60EL
Shop By Manufacturer
Sure Star 2U 600W 80 Plus High Efficiency Power Supply, Model # SS-2U60EL




Introduction:
- Introduce the industrial graded SS-2U70EL Series Power Supply.
- Design to fit perfectly into your 2U Rackmount chassis.
- Triple circuit protections and Active PFC. SS-2U70EL offer unswerving performance for your 2U chassis.
| - SPECIFICATIONS - |
* AC Input Voltage Range: 100VAC ~ 240VAC, +/-10%, 47 to 63 Hz.
* INPUT CURRENT:10.0 A ( RMS ) FOR 115VAC /5.0 A ( RMS ) FOR 230VAC.
* Input Power Factor: The minimum power factor at full load shall be
0.98/115V 60 Hz and 0.95/230V 50 Hz.
* Inrush current: 35A MAX. FOR 115 VAC / 55A MAX. FOR 230 VAC.
* DC Output: 700W maximum
* INPUT CURRENT:10.0 A ( RMS ) FOR 115VAC /5.0 A ( RMS ) FOR 230VAC.
* Input Power Factor: The minimum power factor at full load shall be
0.98/115V 60 Hz and 0.95/230V 50 Hz.
* Inrush current: 35A MAX. FOR 115 VAC / 55A MAX. FOR 230 VAC.
* DC Output: 700W maximum
| OUTPUT VOLTAGE | OUTPUT CURRENT | REGULATION | OUTPUT | ||
| MIN ( A ) | MAX ( A ) | LOAD | LINE |
RIPPLE & NOISE MAX. [ P-P ] |
|
| +5V | 0.5 | 25 | ±5% | ±1% | 60mV |
| +12V | 2 | 56 | ±5% | ±1% | 120mV |
| -12V | 0 | 0.8 | ±5% | ±1% | 120mV |
| +3.3V | 0.5 | 25 | ±5% | ±1% | 60mV |
| +5VSB | 0.1 | 3.5 | ±5% | ±1% | 60mV |
1. Noise Test - Noise bandwidth is from DC to 20 MHz.
2. Ripple frequencies greater than 1MHz shall be attenuated by the measurement
System.
3. Add 0.1uF/10uF capacitor at output connector terminals for ripple and noise
measurements.
4. The combined total power from 5V & 3.3V shall not exceed 180W.
| - FEATURES - |
• DIMENSION: D225 X W100 X H70mm
• COOLING: By forced air.
• TEMPERATURE RANGE: Operation 0℃~45℃
• HOLD UP TIME: 16ms at maximum load & normal input voltage
• EFFICIENCY: TYPICAL >80% AT 115VAC, FULL LOAD.
• POWER GOOD SIGNAL: PW-OK is power good signal and should be asserted high by the Power Supply to indicate that +5VDC and +3.3VDC output are above the under voltage thresholds of the Power Supply TTL. compatible signal out with 100ms to 500ms.
• OVER POWER PROTECTION: The Power Supply shall shut down when output power exceeds 110﹪to 160﹪ of full load and require a power on cycle be performed by the operate
• OVER VOLTAGE PROTECTION: Standard on +5.0V, set at 6.5VDC ±0.75VDC
• SHORT CIRCUIT PROTECTION: A short circuit placed between the DC return and the output shall cause no damage and the Power Supply shall shutdown.
• EMI: FCC CLASS B, CISPR22 CLASS B.
• AGENCY APPROVALS: TO MEET UL, CUL, TUV.
• MTBF OF Power Supply ELECTRONNIS: 100,000 hours at 25℃ 75% loading.
• COOLING: By forced air.
• TEMPERATURE RANGE: Operation 0℃~45℃
• HOLD UP TIME: 16ms at maximum load & normal input voltage
• EFFICIENCY: TYPICAL >80% AT 115VAC, FULL LOAD.
• POWER GOOD SIGNAL: PW-OK is power good signal and should be asserted high by the Power Supply to indicate that +5VDC and +3.3VDC output are above the under voltage thresholds of the Power Supply TTL. compatible signal out with 100ms to 500ms.
• OVER POWER PROTECTION: The Power Supply shall shut down when output power exceeds 110﹪to 160﹪ of full load and require a power on cycle be performed by the operate
• OVER VOLTAGE PROTECTION: Standard on +5.0V, set at 6.5VDC ±0.75VDC
• SHORT CIRCUIT PROTECTION: A short circuit placed between the DC return and the output shall cause no damage and the Power Supply shall shutdown.
• EMI: FCC CLASS B, CISPR22 CLASS B.
• AGENCY APPROVALS: TO MEET UL, CUL, TUV.
• MTBF OF Power Supply ELECTRONNIS: 100,000 hours at 25℃ 75% loading.
| - CONNECTORS - |
|
|
|
|
|
|
|
|
20+4 Pin |
P4 MB |
Peripheral |
FDD |
8-Pin |
SATA |
|
X 1 |
X 1 |
X 12 |
X 1 |
X 1 |
X 2 |

Frequently Bought Together With


Special Offers *
Customer Account
Customer Service
© 2001-2012 Mypccase.com All rights reserved.







